Legal Information

Legal
Information

© Copyright, Miele New Zealand Limited (Miele). All rights reserved. All data posted on this website are subject to copyright and may not be copied, distributed, downloaded, modified, printed, reposted or transmitted in any way for commercial use.

Disclaimer
Data on this website is provided by Miele "as is" and without warranty of any kind. Miele reserves the right to make changes or alterations to any Miele product without prior notice. Whilst Miele sincerely aims at ensuring that all information on this website is correct, this site may contain some errors or inaccuracies.

Miele on data security and privacy
Miele will not collect any personally identifiable information without your consent.

1. Use of personally identifiable information
Miele will only collect personally identifiable information, such as your name, address, email address, telephone number or fax number, for the express purpose for which you provided the data (e.g. to process requests for information or brochures, to process orders or send out newsletters). This data is used to provide information and services which are tailored to your requirements and continually improve the quality of our offering.
Your personally identifiable data will only be used within the Miele group and by business partners who are commissioned by us to fulfil your requests. Miele will exercise utmost diligence to protect your personal data. Thus, personally identifiable information which is collected while you browse our websites will always comply with New Zealand legislation.

2. Technologies
Miele uses Internet technologies (e.g. cookies, Java Script) for the sole purpose of making Internet applications easier to use. In order to improve the attractiveness of our websites, information is retrieved automatically in a limited number of cases (e.g. browser, operating system, click count, average time spent per page). This information is collected in such a manner as not to be personally identifiable.

3. Security
Miele guarantees to safeguard your personally identifiable information against loss, damage, corruption, manipulation, unauthorised access and unauthorised disclosure.

4. Hyperlinks to other websites
Cross-references (so called hyperlinks) on Miele websites may connect to Internet sites run by other companies. Miele New Zealand Limited does not accept any liability for the accuracy and legality of pages to which links are provided on this site. Miele also cannot accept any responsibility whatsoever for the content of such sites or their data security policies.

5. Data security issues
Any questions regarding data security at Miele? If so, please do not hesitate to contact our Privacy Officer (contact@miele.co.nz).

Further developments in Internet technology will, of course, impact our data security strategy. Should there be any need to modify our policy, timely notification of changes will be given on this website.

Terms and Conditions of Sale

Terms and
Conditions
of Sale - Projects

Miele New Zealand Ltd

Terms and Conditions of Sale - Projects - Effective from August 2014

Terms and Conditions of Sale - Projects - Effective from September 2010 Miele Terms and Conditions of Sale - Projects

Terms and
Conditions
of Service

Miele New Zealand Ltd

Terms and Conditions of Service - Effective from August 2021

Please click on the below link to view the Terms and Conditions of Service. Miele Terms and Conditions or Service

Consumer
Services

Miele New Zealand Limited.

Consumers Services

General
These supplementary contract terms apply to the sale of the Miele Service Certificate by Miele (sales subsidiary country and address) to consumers via this website. The service work is executed directly by Miele or authorized specialist retailers. The service can be executed either by Miele specialist retailers or their subcontractors. The supplementary contract terms precede the Miele General Terms and Conditions in case of clashes.

Contract conclusion
The presentation of the Miele Service Certificate within the Miele web shop does not reflect a contract offer. A binding order is only transmitted to Miele once the customer pushes the button CONFIRM THE ORDER within the Miele web shop. The customer will immediately receive an order confirmation via email. This order confirmation does not yet reflect an order acceptance. If Miele accepts the order and enters the agreement, the customer will see the Miele Service Certificate as a PDF document. The customer will subsequently receive a contract confirmation including the certificate via email. The consumer will be able to view and download the Miele Service Certificate at all times under the My Miele account.

Please click the link below to view the Miele Terms & Conditions of the Miele Service Certificate and Miele Maintenance Service.

 

Miele Maintenance Service Terms & Conditions Miele Service Certificate Terms & Conditions

Quality Policy

Miele Quality Policy

Miele ANZ imports, markets and distributes to commercial and domestic customers products supplied by its parent company Miele Germany. Miele’s global vision is to be the world’s most trusted and desirable premium brand.

We have adopted and committed ourselves to the quality objectives formulated by the founders of Miele in Germany in 1899, which can be simply summarised in two words:

"Immer Besser” (Forever Better)

“We create delightful experiences redefining excellence every day, everywhere”

“Immer Besser” not only applies to the Miele product itself, but also to the standard of customer service and the personal conviction of all employees.

We are seeking to meet the needs and expectations of our customers, shareholders and other stakeholders through:-

  • Focusing on consistently meeting our customers’ requirements and enhancing their satisfaction.
  • Our commitment to maintain an effective management system that meets all applicable compliance obligations.
  • Regular reviews of risks and opportunities which can affect conformity of our products/services and the ability to enhance customer satisfaction.
  • Regular reviews of our documented key performance indicators to ensure that the objectives of the business stay relevant and are further developed and improved upon throughout all levels of the company.
  • Our commitment to ensure all our employees are aware of this policy and individually contribute to the process of continual improvement of the quality management system and are aware of implications of not conforming with the QMS requirements.
Click here to view the Miele Quality PolicyClick here to view the Miele Work Health and Safety Policy

Quality

TESTED TO THE EQUIVALENT OF 20 YEARS´ USE

During the development phase of the product series listed hereafter Miele has conducted tough durability tests simulating a 20 years average use of an average household. The extent of testing for each tested series is described below. This does not represent any assurance or guarantee of a durability of our marketed product series for 20 years. Notwithstanding testing during development phase individual machines may require occasional servicing or may require repair or replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

WASHING MACHINES

MIELE has tested development models and core components during the development phase of the washing machine series W1 (front loader models) in tough endurance tests. The aim of these tests conducted by MIELE is to simulate average usage over a period of 20 years.
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 5,000 wash cycles with different programs as a basis. This corresponds to 5 wash cycles per week with use in 50 weeks per year over a period of 20 years. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results.
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The washing machine series is not released until the test results meet the specified criteria for the reliability of the washing machine series.
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test washing machines for a service life of 20 years based on the average use by an average household (Fraunhofer Institut, Expertise LBF- No. 307049-ExW).
This does not represent any assurance or guarantee of a durability of our marketed washing machines for 20 years. Notwithstanding testing during the development phase, individual machines may require occasional servicing or may require repair or replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

TUMBLE DRYERS

MIELE has tested development models and core components during the development phase of the dryer series T1 (heat pump models) in tough endurance tests. The aim of these tests conducted by MIELE is to simulate average usage over a period of 20 years.  
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 5,000 drying cycles with different programs as a basis. This corresponds to 5 drying cycles per week with use in 50 weeks per year over a period of 20 years. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results. 
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The dryer series is not released until the test results meet the specified criteria for the reliability of the dryer series. 
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test dryers for a service life of 20 years based on the average use by an average household (Fraunhofer Institut, Expertise LBF- No. 308005).  
This does not represent any assurance or guarantee of a durability of our marketed dryers for 20 years. Notwithstanding testing during the development phase, individual machines may require occasional servicing or may require repair or replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

WASHER DRYERS

MIELE has tested development models and core components during the development phase of the washer-dryer series WT1 (heat pump models) in tough endurance tests. The aim of these tests conducted by MIELE is to simulate average usage over a period of 20 years.  
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 5,000 washing and 4000 drying cycles with different programs as a basis. This corresponds to 5 washing and 4 drying cycles per week with use in 50 weeks per year over a period of 20 years. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results. 
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The washer-dryer series is not released until the test results meet the specified criteria for the reliability of the washer-dryer series. 
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test washer-dryers for a service life of 20 years based on the average use by an average household (Fraunhofer Institut, Expertise LBF- No. 308005).  
This does not represent any assurance or guarantee of a durability of our marketed washer-dryers for 20 years. Notwithstanding testing during the development phase, individual machines may require occasional servicing or may require repair or replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

DISHWASHERS

MIELE has tested development models and core components during the development phase of the dishwasher series G 5000 & 7000 in tough endurance tests. The aim of these tests conducted by MIELE is to simulate average usage over a period of 20 years.
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 5,600 dishwashing cycles with different programs as a basis. This corresponds to 5.6 dishwashing cycles per week with use in 50 weeks per year (280 cycles) over a period of 20 years. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results.
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The dishwasher series is not released until the test results meet the specified criteria for the reliability of the dishwasher series.
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test dishwasher for a service life of 20 years based on the average use by an average household (Fraunhofer Institut Expertise LBF-Bericht Nr. 308595 – ExG,).
This does not represent any assurance or guarantee of a durability of our marketed dishwashers for 20 years. Notwithstanding testing during the development phase, individual machines may require occasional servicing or may require repair or replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product.

OVENS

MIELE has tested core components of H 7000 oven series in tough endurance tests during its development phase. The aim of these tests conducted by MIELE is to simulate average usage of main functionalities of the ovens and ovens with microwave over a period of 20 years. 
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 2160 hours of use regarding ovens and a total of 3160 hours of use regarding ovens with microwave function in various operating modes. This corresponds to 108 hours of oven use per year and 158 hours use of the ovens with microwave function per year (108h use of the oven and 50h use of the microwave function). Furthermore, 3 pyrolytic cleaning cycles were considered. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results.
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The oven series is not released until the test results meet the specified criteria for the reliability of the core components of the series. The core components are all main components required for proper use of respective main functions of the product. 
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test main functions  of the product for a service life of 20 years based on the average use by an average household.  (Fraunhofer Institut, Expertise, LBF-Nr. 308005- ExÖ).
This does not represent any assurance or guarantee of a durability of our ovens and ovens with microwave for 20 years. Notwithstanding testing core components during the development phase, individual machines may require occasional servicing or may require replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

STEAM OVENS

MIELE has tested core components of DG 7000 steam oven series, including combi products DGC (steam oven with baking function) and DGM (steam oven with microwave) in tough endurance tests during its development phase. The aim of these tests conducted by MIELE is to simulate average usage of main functionalities of the steam ovens over a period of 20 years. 
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 2500 hours of use regarding steam ovens (DG), a total of 4700 hours of use regarding steam ovens with baking function (DGC) and a use of  3500 hours regarding steam ovens with microwave function (DGM), each of them tested in various operating modes. This corresponds to 125 hours of steam oven use per year (DG), 235 hours of steam oven or baking use (DGC), and 175 hours use of steam oven or microwave function (DGM) per year. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results. 
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The steam oven series is not released until the test results meet the specified criteria for the reliability of the core components of the series. The core components are all main components required for proper use of respective main functions of the product. 
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test main functions of the product for a service life of 20 years based on the average use by an average household.  (Fraunhofer Institut, Expertise, LBF-Nr. 308234).
This does not represent any assurance or guarantee of a durability of our steam ovens for 20 years. Notwithstanding testing core components during the development phase individual machines may require occasional servicing or may require replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

MICROWAVES

MIELE has tested core components of M 7000 microwave series in tough endurance tests during its development phase. The aim of these tests conducted by MIELE is to simulate average usage of main functionalities of the microwaves over a period of 20 years.
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 1000 hours of use in various operating modes. This corresponds to 50 hours of microwave use per year. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results. 
These tests carried out by MIELE during development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The microwave series is not released until the test results meet the specified criteria for the reliability of the core components of the series. The core components are all main components required for proper use of respective main functions of the product.
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test main functions of the product for a service life of 20 years based on the average use by an average household. (Fraunhofer Institut, Expertise, LBF-Nr. 308005).
This does not represent any assurance or guarantee of a durability of our microwaves for 20 years. Notwithstanding testing core components during development phase individual machines may require occasional servicing or may require replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

BUILT-IN VACUUM SEALING DRAWERS

MIELE has tested core components of EVS 7000 vacuum drawer series in tough endurance tests during its development phase. The aim of these tests conducted by MIELE is to simulate average usage of main functionalities of the vacuum drawers over a period of 20 years.  
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 120 hours of use (representing 7.000 vacuum cycles including welding) regarding vacuum drawers EVS 7000 each of them tested in various operating modes. This corresponds to 350 vacuum drawer uses for one minute per year. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results.
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The vacuum drawer series is not released until the test results meet the specified criteria for the reliability of the core components of the series. The core components are all main components required for proper use of respective main functions of the product.
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test main functions of the product for a service life of 20 years based on the average use by an average household (Fraunhofer Institut, Expertise, LBF-Nr. 308234).
This does not represent any assurance or guarantee of a durability of our vacuum drawers for 20 years. Notwithstanding testing core components during the development phase, individual machines may require occasional servicing or may require replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

GOURMET WARMING DRAWERS

MIELE has tested core components of warming drawer series ESW7000 in tough endurance tests during the development phase of the series. The aim of these tests conducted by MIELE is to simulate average usage of main functionalities of the warming drawers over a period of 20 years.
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 7,500 hours of use with different speed settings as a basis. This corresponds to 450 minutes of use per week in 50 weeks, resulting in 375 h per year over a period of 20 years. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results. 
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The warming drawer series is not released until the test results meet the specified criteria for the reliability of the warming drawer series. 
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test main functionalities of warming drawers for a service life of 20 years based on the average use by an average household (Fraunhofer Institut, Expertise, LBF-Nr. 308234).  
This does not represent any assurance or guarantee of a durability of our warming drawers for 20 years. Notwithstanding testing during the development phase, individual products may require occasional servicing or may require replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

VACUUM CLEANERS
Classic C1, Compact C1, Compact C2, Complete C2, Complete C3, Blizzard CX1, Swing H1, Dynamic U1 and Boost CX1

MIELE has tested models and core components in tough endurance tests during the development phase of the residential mains-operated vacuum cleaner series with bag ,Classic C1, Compact C1, Compact C2, Complete C2, Complete C3 and Blizzard CX1). The aim of these tests conducted by MIELE is to simulate average usage over a period of 20 years.
The basis for determining the test conditions for the endurance test is the average consumer habits known from studies and surveys. MIELE uses a total of 750 h of appliance running as a basis. This corresponds to 45 minutes of use per week with use in 50 weeks per year over a period of 20 years. The requirements derived from this were translated into test conditions. In addition to the exact test conditions, these also specify the number of test items to be tested in order to obtain statistically reliable test results.
These tests carried out by MIELE during the development phase are monitored by our employees. The corresponding results are recorded and evaluated by us. The above mentioned vacuum cleaner series is not released until the test results meet the specified criteria for the reliability of the above mentioned vacuum cleaner series.
The tests carried out by MIELE "To the equivalent of 20 years use" are based on a comprehensive concept, which has been implemented by operating instructions, laboratory test instructions and supplementary factory standards. This concept has been reviewed as part of an operational stability study with the result that this concept is complete, it corresponds to the state of the art and with this approach it is possible to test residential mains-operated vacuum cleaner for a service life of 20 years based on the average use by an average household (Fraunhofer-Institut , LBF-Bericht Nr. 307530 – Expertise Bodenpflege).
This does not represent any assurance or guarantee of a durability of the mentioned vacuum cleaners for 20 years. Notwithstanding testing during the development phase, individual machines may require occasional servicing or may require replacement of core components. In this respect, the statutory warranty provisions apply and – where applicable – additional provisions on product warranty within the general sales terms for the Miele product.

OTHER DISCLAIMERS

We test up to 10'000 hours:
During the development phase of washing machines series W1 Miele and dryer series T1 has tested models & core components for 10,000 hours.

Saving up to 3300 bathtubs of water
Over the expected lifespan, our machines save 596,484* liters of fresh water, or 3977 bathtubs.  In comparison with hand wash, 5 rinsing cycles per week with 14 standard places setting over 20 years (one bathtub with an average of 150l).

Our washing machine engines are tested up to 3 times longer than some car engines.
During the development phase of washing machines series W1 Miele and dryer series T1 has tested models & core components for 10,000 hours.